What factors affect the cost of fencing installation?

[ad_1]

There are many reasons why your cost of installing a fence can skyrocket. Although there are ways to reduce the financial impact (do it yourself, cheaper materials), extra work may not be for everyone and sometimes costs are inevitable if you want quality. So, what factors most influence the cost of installing a fence? Here are four of the worst offenders:

Choosing the best materials

It goes without saying that the cost of installing a fence varies the most depending on the material used. Here is a list of the average cost per foot of the most common gate materials:

1. Aluminum – approximately $ 40 per foot

2. Chain link – varies depending on the price of steel, but averages between $ 3 and $ 6 per foot

3. Wooden – varies between $ 3 – $ 9 per foot

4. Vinyl – varies between $ 4 – $ 12 per foot

Remember that while accessibility is important, you must first consider the main purpose of your enclosure when choosing the best materials. You may also have additional factors to consider, such as maintenance, homeowners’ association rules, and municipal permit laws.

Get the tools to do it yourself

It is possible to do the work yourself. This can save you a lot of money, but you also need to have the right tools and equipment to make sure your gate is flat and structurally strong.

For example, you will need a hand auger to dig holes for poles. They usually range in price from $ 15 to $ 100, or you can rent a feed auger for only $ 50 a day.

A manual postal driver for driving stakes into the ground can be hired for about $ 20 a day. The powered option can be rented for $ 60 a day, but can cost up to $ 3,000 to purchase. You should only make this type of investment if your work is particularly large, such as enclosing a multi-acre farm.

Hiring professionals

These jobs can be time consuming and skillful, which is why many homeowners who are less comfortable turn to highly qualified contractors to simplify matters. However, hiring professionals will significantly increase your costs.

The installation of the fence is usually done in three stages. These stages are digging holes in the poles, installing the poles and applying the selected fence. Estimate how long it will take the performers to complete everything. Your future company should give you a reliable schedule to use as a guide for labor costs.

Most companies charge between $ 30 and $ 50 an hour for labor, but there are several factors that can aggravate these average costs. First of all, does your property contain unusual obstacles, steep slopes or hard-to-reach areas? Or did the contractor have to check the municipal permits or call the electric company about underground wires because you forgot? These can be some expensive problems.

Belief in concrete is the only possibility

Even the use of concrete to install the poles increases the cost. A more affordable option that can be used that is just as effective is sand, gravel and cement mixture.

Finally, to avoid overspending during the installation of the fence, first take a good look at your yard before making any decisions, and make an honest estimate of how much work and money will be involved. You can then decide which material is best for the situation, whether it is worth using concrete, and whether it will be more cost-effective to do the work yourself or hire a contractor.

[ad_2]